Protocol⁴ Hydrogen Water Tower — Hydrogen-Rich RO Hot & Cold Water System

The Protocol⁴ Hydrogen Water Tower is a freestanding, plumbed water system combining five-stage reverse-osmosis filtration, hydrogen-rich drinking water, hot-water dispensing, and cooling capability in one streamlined wellness appliance.

Designed to connect directly to a municipal tap-water supply, the system filters incoming water through a five-stage purification process before dispensing purified hydrogen-rich water. The manufacturer's specification table identifies a hydrogen concentration of ≥2,000 ppb, purified-water flow of approximately 70 L/hour, and three water outlets.

With touchscreen controls, adjustable hot-water temperature, automatic water replenishment, filter-replacement reminders, and a child-lock function, the Hydrogen Water Tower is designed to make filtered hydrogen water part of an everyday home or wellness-space routine.

Hydrogen-Rich Water + Five-Stage RO Filtration

Rather than functioning solely as a hydrogen-water generator, the Hydrogen Water Tower incorporates a complete five-stage filtration system.

The system uses:

1. PP cotton pre-filter
2. UDF filter cartridge
3. Compressed activated-carbon filter
4. Reverse-osmosis membrane
5. Post-activated-carbon filter

Together, these stages are designed to progressively filter incoming municipal tap water before final dispensing.

The manual identifies the RO membrane filtration accuracy as approximately 0.001–0.0001 microns.

≥2,000 ppb Hydrogen Concentration

The manufacturer's current product-specification table identifies hydrogen concentration as:

≥2,000 ppb

This is an important specification for shoppers comparing hydrogen-water systems, because the Hydrogen Water Tower is designed to combine hydrogen generation with the machine's integrated filtration and dispensing system rather than functioning as a simple countertop hydrogen bottle.

Hot, Cold + Ambient Water from One System

The Hydrogen Water Tower is designed to provide multiple dispensing options from a single freestanding appliance.

The manual describes the system as providing:

• Room-temperature hydrogen drinking water
• Hot drinking water
• Cold drinking water when equipped/configured with cooling

The touchscreen interface provides one-touch dispensing, while the hot-water system incorporates a child-lock function designed to reduce accidental dispensing of hot water.

Intelligent Touch Controls

An integrated microcomputer control system manages the machine's primary functions.

The manual identifies features including:

• Large temperature display
• Adjustable heating-temperature settings
• One-touch water dispensing
• Automatic water replenishment
• Filter-replacement reminders
• Working-status display
• Optional TDS water-quality display
• Hot-water child lock

The hot-water temperature can be cycled between 50°C and 95°C (122°F–203°F) through the control system.

Automatic Heating + Cooling Control

Once connected to the appropriate water and power supply, the system automatically replenishes water and manages heating according to its operating settings.

Cooling is independently controlled through the rear cooling switch, while the system automatically maintains selected temperatures during operation.

Five-Stage Filter System

Each filtration stage serves a different function within the water-treatment process.

Protocol⁴'s manual provides estimated replacement intervals ranging from approximately 3–6 months for the early-stage filters to 12–24 months for the RO membrane, depending on the filter and actual water quality and usage.

Actual replacement frequency can vary by local water quality, season, and usage.

Direct Municipal-Water Connection

The Hydrogen Water Tower is designed to connect directly to a municipal water supply rather than relying on manually filled water containers.

Protocol⁴ specifies an applicable incoming-water range of:

• Water pressure: 0.1–0.6 MPa
• Water temperature: 4–38°C
• pH: 5–10
• Source: municipal tap water

The installation also requires a wastewater/drain connection or suitable collection arrangement for discharged water.

Installation + Ventilation

The Hydrogen Water Tower should be installed on a stable, level indoor surface with access to:

Municipal water → drainage → appropriate electrical service

Protocol⁴ instructs users to maintain more than 20 cm / approximately 8 inches of clearance at the sides and rear to support ventilation.

The machine should not be installed outdoors or in areas exposed to freezing temperatures, rain, snow, excessive humidity, direct sunlight, flammable materials, or volatile chemicals.

Technical Specifications

*The manual identifies the unit as SKU/model P830 on its cover while the internal specification table identifies mold/model CM 5683. The delivered product label should govern final configuration.

Important Electrical Planning Information

The manufacturer's specification table lists the system at:

220 V / 50 Hz and 1,650 W rated power.

However, another section of the same manual states:

“Do not attempt to use a standard US 110V/15A outlet” and indicates 3,500 W during peak cooling.

Because these figures differ within the manufacturer's documentation, electrical requirements should be confirmed for the specific delivered U.S. configuration before installation. The product should not be connected based solely on assumptions drawn from the nominal specifications.

What's Included

The manufacturer's packing list identifies:

• 1 complete machine
• 1/4-inch PE pipe — approximately 1.5 meters
• Instruction manual / warranty card
• Water inlet tee

Filter Maintenance

Filter elements are consumable components and require periodic replacement.

The manufacturer's estimated intervals include:

• PP cotton: approximately 3–6 months
• UDF: approximately 3–6 months
• Compressed activated carbon: approximately 6 months
• RO membrane: approximately 12–24 months
• Post-activated carbon: approximately 12–18 months

Actual replacement timing depends on water quality, location, usage, and season.

This makes ongoing filter availability an important consideration when purchasing the system.

Designed for the Modern Wellness Environment

At approximately 54 inches tall, the Hydrogen Water Tower has the footprint and appearance of a premium freestanding water appliance rather than a small countertop device.

Its combination of hydrogen-rich water, reverse-osmosis filtration, hot and cold dispensing, automated controls, and direct plumbing makes it particularly well suited to:

• Home wellness rooms
• Fitness and recovery spaces
• Wellness studios
• Longevity-focused environments
• Premium offices
• Hospitality and retreat settings

Important Product Information

The Hydrogen Water Tower should be installed, operated, cleaned, drained, and maintained according to the manufacturer's current instructions.

Hot water can cause burns. The machine incorporates a child lock, which should remain enabled where children may be present.

Filters require regular replacement, and the unit should be drained and disconnected appropriately when it will remain unused for an extended period.

Protocol⁴ at Aurum Apex

The Protocol⁴ Hydrogen Water Tower expands the Protocol⁴ collection beyond recovery equipment into everyday wellness infrastructure.

By combining ≥2,000 ppb hydrogen-rich water, five-stage reverse-osmosis filtration, multiple water temperatures, direct plumbing, and intelligent controls within one freestanding system, it provides a sophisticated way to incorporate filtered hydrogen water into a dedicated wellness environment.

Product Resources

Protocol⁴ Hydrogen Water Tower Instruction Manual (PDF)