P1 Light Therapy Panel

Technical Specifications

Product: P1 Light Therapy Panel

SKU: P661

Product Type: Six-wavelength full-body light therapy system

Light Technology: Visible blue, green, red, and near-infrared LED light

LED Type: 0.2 W 2835 LED array

LED Quantity: 12,312

LED Strip Quantity: 38

Wavelengths: 450 / 525 / 633 / 660 / 850 / 940 nm

Wavelength Operation: All six wavelengths delivered simultaneously

Exposure Angle: 120°

Rated Power: 1,000 W

Power Supply: 110 V AC, 9 A

Electrical Connection: Grounded U.S. plug

Controls: Integrated physical touch controls

Start Response: Under 3 seconds

Session Timer: Adjustable, maximum 30 minutes

Cooling System: Forced-air cooling fans

Configuration: Half-cabin design

Positioning: Vertical, horizontal, and 360-degree adjustment

Height Adjustment: Approximately 7.9 in (20 cm)

Ingress Protection: IP53

Operating Environment: 0–70°C, at or below 75% relative humidity, non-condensing

Minimum Wall Clearance: 12 in (30 cm)

Recommended Service Clearance: Approximately 39 in (1 m), where practical

Support Frame: Indoor vertical support frame with locking casters

Dimensions (L × W × H): 33.5 × 30 × 77.8 in

Metric Dimensions: 85 × 76.5 × 197.5 cm

Net Weight: Approximately 99 lb (45 kg)

Available Colors: Black / White

Manufacturer Warranty: One-year limited warranty

Configuration Information

Specifications reflect the manufacturer's supplied documentation for the P1 Light Therapy Panel, SKU P661.

The six wavelengths operate simultaneously. Individual wavelength selection is not specified as an available feature.

The rating label supplied with the delivered equipment controls final electrical and installation requirements.

Six-Wavelength Light Technology

The P1 incorporates six wavelengths spanning visible and near-infrared light.

Blue Light — 450 nm

Visible blue light contributes to the panel's multi-wavelength output.

Green Light — 525 nm

Visible green light adds another wavelength to the integrated light spectrum.

Red Light — 633 nm

The first of two red wavelengths incorporated into the system.

Deep Red Light — 660 nm

A second red wavelength complements the 633 nm output.

Near-Infrared Light — 850 nm

An invisible near-infrared wavelength incorporated into the light array.

Near-Infrared Light — 940 nm

An additional near-infrared wavelength completes the six-wavelength configuration.

Simultaneous Light Output

All six wavelengths operate together during each session.

The available manufacturer documentation does not identify independent wavelength selection as a feature of the P1.

High-Density LED Array

12,312 LEDs

The P1 contains 12,312 LEDs distributed across 38 light strips.

120-Degree Exposure Angle

The integrated LED array provides a broad 120-degree exposure angle.

Adjustable Half-Cabin Design

Horizontal Positioning

The panel can be arranged horizontally above a suitable user area.

Vertical Positioning

The support system accommodates vertical light-exposure configurations.

360-Degree Adjustment

The adjustable mounting system provides additional positioning flexibility.

Height Adjustment

Approximately 7.9 inches (20 cm) of height adjustment allows further customization of the panel's position.

Controls & Session Management

Physical Touch Controls

An integrated three-button interface provides convenient access to basic operating functions.

Adjustable Timer

Session duration can be adjusted up to a maximum of 30 minutes.

Fast Start Response

The manufacturer lists a start response of less than three seconds.

Cooling & Mobility

Active Cooling

Integrated forced-air fans help maintain appropriate operating conditions.

Mobile Support Frame

A wheeled base with locking casters allows the panel to be repositioned and secured.

Stable Installation

The support frame uses adjustable mounting hardware and locking casters to maintain the selected position during operation.

Shipping & Delivery

The P1 Light Therapy Panel is a large-format wellness system supplied with an adjustable support frame and related assembly components.

Processing & Shipping Timeframes

Shipping and delivery timeframes vary depending on product availability, order processing, and destination.

Estimated delivery information will be provided when available. Specialized shipping arrangements may require additional coordination.

Delivery Inspection

Inspect the packaging and equipment immediately upon arrival.

Verify that the panel, support frame, casters, mounting hardware, electrical cord, and supplied accessories are present and undamaged.

Report visible shipping damage, missing components, or suspected defects to Aurum Apex within 48 hours of delivery, including photographs or videos when applicable.

Electrical Requirements

Power Supply: 110 V AC

Rated Current: 9 A

Rated Power: 1,000 W

Connection: Grounded U.S. plug

The manufacturer specifies a dedicated, properly grounded electrical outlet and appropriate electrical protection consistent with applicable codes.

The installation manual also specifies suitable 16 A leakage protection, GFCI, or RCD protection according to local requirements.

Do not defeat the grounding connection or use an outlet with uncertain electrical protection.

The delivered product's rating label controls final electrical requirements.

Assembly & Installation

Assembly requires two capable adults.

The supplied support frame, mounting hardware, and locking casters must be assembled according to the manufacturer's instructions.

Confirm that all fasteners are secure, the panel holds its selected position, and the frame remains stable before use.

Placement & Clearance

Install indoors on a stable, level surface.

Maintain at least 12 inches (30 cm) of clearance from walls.

Where practical, provide approximately 39 inches (1 meter) of unobstructed service and airflow space.

Keep ventilation openings clear and avoid exposure to moisture, steam, excessive dust, and heat sources.

Equipment Dimensions

Dimensions: 33.5 × 30 × 77.8 in

Net Weight: Approximately 99 lb

Packaged Shipping Weight: Approximately 158.7 lb

Confirm doorway access, available floor space, and equipment clearance before delivery.

Installation Assistance

For questions regarding delivery arrangements, electrical preparation, or equipment placement, contact Aurum Apex at 888-704-4075.

Returns & Refunds

Eligible Returns

Eligible products may be returned within 30 days of purchase, provided they meet the conditions outlined below.

Products must be sealed, unopened, unused, and in their original packaging.

Proof of purchase is required.

Return Authorization & Shipping

All returns must be reviewed and approved before merchandise is shipped back.

To request a return, contact Aurum Apex with your order number and reason for the return.

Customers are responsible for return shipping costs unless otherwise required by applicable law.

We recommend using a trackable shipping method. Aurum Apex is not responsible for return shipments lost or damaged in transit.

Refund Processing

Once an eligible return has been received, inspected, and approved, a refund will be issued to the original payment method.

Manufacturer Warranty

Eligible devices and machines are covered by a one-year limited manufacturer warranty.

The warranty covers defects in materials or workmanship under normal, intended use.

Damage resulting from misuse, accidents, neglect, or unauthorized modifications is excluded.

Warranty claims are subject to review, and eligible products may be repaired or replaced in accordance with the applicable warranty terms.

Customer Support

For return requests, delivery concerns, or assistance with your order, please contact:

Aurum Apex
support@aurumapex.com
888-704-4075

These product-specific terms supplement the Aurum Apex Return & Refund Policy and do not limit rights provided under applicable law.

One-Year Limited Manufacturer Warranty

The P1 Light Therapy Panel is covered by a one-year limited manufacturer warranty against defects in materials and workmanship under normal use and operation.

The warranty begins on the date of delivery to the original purchaser and is non-transferable.

Warranty Coverage

For confirmed covered defects, the warranty provider may elect to:

• Repair defective components.
• Replace defective components.
• Provide approved replacement parts.
• Arrange qualified service when necessary.

Covered replacement parts, labor, and approved service visits are provided without charge to the purchaser.

Conditions for Coverage

The panel must be installed, operated, cleaned, inspected, and maintained according to the manufacturer's instructions.

Required maintenance procedures must be completed, and reasonable service records should be retained.

Unauthorized modifications, improper installation, or failure to follow operating requirements may void warranty coverage.

Warranty Exclusions

The limited warranty does not cover damage resulting from:

• Misuse, abuse, negligence, or accidents.
• Improper installation or electrical supply.
• Unauthorized repairs, modifications, or alterations.
• Unapproved replacement parts.
• Failure to follow operating or maintenance instructions.
• Unapproved cleaning products or improper cleaning.
• Fire, flooding, power surges, impact, or other external events.
• Normal wear or cosmetic damage that does not affect operation.

LED Array & Surface Protection

Cracks, punctures, deep scratches, abrasions, staining, discoloration, or other surface damage caused by impact, sharp objects, improper cleaning, or user negligence are excluded from warranty coverage.

Warranty Claims

Customers requesting warranty assistance should contact Aurum Apex.

Please provide:

• Proof of purchase and order number.
• Product model and SKU P661.
• Serial number.
• Description of the issue.
• Photographs or videos when requested.

Do not disassemble or ship the equipment unless instructed by authorized service personnel.

Important Warranty Information

The written manufacturer warranty and applicable sales agreement govern coverage, exclusions, and available remedies.

Customer Support

For warranty questions or assistance, contact:

Aurum Apex
support@aurumapex.com
888-704-4075

Routine Care & Maintenance

Proper cleaning, inspection, and preventive maintenance help maintain the P1 Light Therapy Panel's appearance, operating condition, and warranty eligibility.

Always follow the manufacturer's current maintenance instructions.

Before Cleaning

Switch off the equipment, disconnect electrical power, and allow at least three minutes for cooling before cleaning, moving, adjusting, or inspecting the panel.

Cleaning the Panel

Use a clean, soft, lint-free cloth to remove dust from accessible surfaces.

Apply a mild, nonabrasive, acrylic-safe cleaning or disinfecting product to the cloth rather than spraying directly onto the equipment.

Wipe user-contact and touch surfaces after each session.

Allow all cleaned surfaces to dry completely before reconnecting electrical power.

Prohibited Cleaning Methods

Do not use:

• Abrasive pads, powders, scrapers, or sharp tools.
• Unapproved solvents or highly concentrated alcohol.
• Steam cleaning or running water.
• Cleaning methods that allow liquid to enter the housing, controls, or ventilation openings.

LED & Acrylic Surface Care

Avoid touching, pressing, or scratching the LED array and protective surfaces.

Do not operate the equipment if the acrylic surface is cracked, deeply scratched, or otherwise damaged.

Cooling & Ventilation

Keep forced-air cooling fans and ventilation openings unobstructed.

Periodically inspect accessible ventilation areas for dust accumulation.

Discontinue use if abnormal fan noise, vibration, excessive heat, or reduced airflow occurs.

Preventive Maintenance

After Each Session

Clean appropriate contact surfaces, allow the equipment to cool, and inspect for visible damage.

Daily

Inspect the frame, casters, mounting hardware, electrical connections, controls, LED surface, fans, and ventilation openings.

Weekly

Clean exterior surfaces, inspect caster locks and fasteners, and verify that the panel holds its selected position.

Monthly

Test the controls and timer, confirm normal light output and fan operation, and inspect accessible mounting components.

Quarterly

Review maintenance records, equipment clearances, structural alignment, and cooling performance.

Every Six Months

Perform a detailed equipment inspection and arrange qualified service when necessary.

Annually

Arrange qualified inspection of electrical, cooling, structural, control, and functional systems, particularly in commercial or high-use environments.

Storage & Handling

Store the equipment in a clean, dry, dust-free environment.

Protect the panel from impact, excessive moisture, vibration, and direct sunlight.

Disconnect power and secure movable components before storage or transportation.

Professional Service

The panel contains no user-serviceable internal components.

Electrical repairs, LED replacement, cooling-fan repairs, and structural servicing must be performed by qualified personnel using approved parts.

Maintenance Records

Commercial operators should maintain records of cleaning, inspections, repairs, service visits, and replacement parts.

Important Safety Information

The P1 Light Therapy Panel is intended for general wellness, comfort, relaxation, appearance-focused skin wellness, and recovery routines.

It is not intended to diagnose, treat, cure, mitigate, monitor, or prevent any disease or injury.

Read the complete instruction manual before installation or operation.

Light Exposure Safety

The P1 delivers six wavelengths of visible and near-infrared light simultaneously.

Exposure depends on session duration, panel distance, orientation, and the area of the body exposed.

Begin with conservative session settings and follow the manufacturer's operating guidance.

Do not exceed the maximum 30-minute session duration.

Longer or closer exposure is not necessarily better.

Eye Protection

Suitable eye protection must be worn throughout illuminated sessions.

Remove contact lenses before use.

Do not stare directly into the LEDs.

Near-infrared wavelengths may not be visible even when the system is operating.

Stop immediately if eye discomfort, visual disturbances, headaches, or other concerning symptoms occur.

Photosensitivity & Medical Precautions

Individuals with photosensitive conditions, significant eye disorders, or medical concerns should consult an appropriately qualified healthcare professional before use.

Additional precautions apply to individuals:

• Taking photosensitizing medications or supplements.
• Undergoing treatment for cancer or other significant medical conditions.
• Who are pregnant.
• With recent eye surgery, laser procedures, chemical peels, or other cosmetic treatments.
• With active skin infections, open wounds, unexplained skin lesions, or significant skin irritation.
• With impaired skin sensation or difficulty detecting heat or discomfort.

Do not use the panel over known or suspected skin cancer, lesions being evaluated for skin cancer, or active cancer sites without appropriate medical guidance.

Individuals who are pregnant should obtain healthcare professional clearance before exposing the abdomen or lower back.

Eye Protection

Remove contact lenses and wear suitable protective eyewear throughout illuminated sessions.

Do not stare directly into the LEDs.

Discontinue use immediately if eye discomfort, visual disturbances, headache, dizziness, burning, or an unexpected skin reaction occurs.

Important: Follow all contraindications, precautions, and user-screening requirements outlined in the manufacturer's instruction manual.